Product Name:2PG Roller Crusher

Belong To Category: PRODUCTS
Release Time: 2018-03-24 14:58
Introduction: Brief Introduction:Roll crusher is mainly used for secondary and fine crushing to materials below middle hardness, such as coking coal, clinker mineral, limestone, metallic and nonmetallic ore.  Roll crusher is available for ore dressing, chemical, cement, refractories, abrasive, building materials industries, finely crushing all kinds of ore and rock below the high, medium hardness,which can make the minimum grain size below 100 mesh,especially in the building materials industry to produce melon meters stone and green bean products etc, and have the more excellent effect than general stave machinery , in recent years, also widely used in crushing steel grit industries
 
Working Principle:There is a wedge-shaped or gasket adjustment device between the two rolls, and on the top of the wedge-shaped device, there is an adjusting bolt. When the adjusting bolt pulls up the wedge, the wedge will lift the movable roll from the fixed roll, so that the gap between the two rolls will become large, and the discharging granularity will become large. When the wedge goes down, under effect of the pressure spring, the gap between the two rolls will become small, and the discharging granularity will become small. The gasket device adjusts the discharging granularity through increasing and decreasing the number or thickness of the gasket, and when the number of the gasket increases, the gap between the two rolls will become large and the discharging granularity will become large; when the number of the gasket decreases, the gap between the two rolls will become large and the discharging granularity will become small
 

Details

Simple Structure:The main structure of the wheel gearing is composed of fixed roll, movable roll, drive shaft, machine box, chassis, cover piece and long gear cover. The motive power of the machine comes from the V-belt pulley of the electromotor, and a pair of middle reduction gear will make the fixed roll rotate, and then a pair of long gear drive on the other side of the fixed roll will drive the movable roll, and the two rolls perform relative movement to squeeze the materials.
 
Application:This series roller crusher is a crushing machine researched and manufactured by our company for coarse crushing. The roll crusher is widely used for crushing high hard and medium hard materials in such industrial departments such as metallurgy, building material and refractory. It has the features of low noise, little powder dust, reliable performance and convenient maintenance.
 
Features:
  • It's available for ore dressing, chemical, cement, refractories, abrasive, building materials industries;
  • Roll crusher has the more excellent effect than general stave machinery;
  • Finely crushing all kinds of ore and rock below the high, medium hardness,which can make the minimum grain size below 100 mesh;
  • Roller crusher is stable operation, easy maintenance, low cost, output size adjustable.
 
Model Diameter Of Roll(mm) Feed Size
(mm)
Grain Size Of 
Discharge(mm)
Productivity
(t/h)
Power Of  
Motor (KW)
2PG-600 600 ≤40 ≤2-10 15-40 15X2
2PG-800 800 ≤60 ≤2-10 20-80 18.5X2
2PG-1000 1000 ≤80 ≤2-10 30-110 22X2
2PG-1200 1200 ≤90 ≤2-10 40-150 30X2
2PG-1500 1500 ≤100 ≤2-10 40-180 45X2

Please fill in your procurement needs and contact information

Copyright © 2017 Technical Support:yunsu cloud

ONLINE
Scan the qr codeClose
the qr code